Editing Installation Guide: Automatic Sensor Taps

== Installation Guide: Automatic Sensor Taps ==

=== Overview ===
Automatic sensor taps (also known as touchless or electronic taps) utilize infrared sensor technology to provide a hygienic, water-efficient, and convenient hand-washing experience. Because these units contain integrated electronic control modules and solenoid valves, the installation process differs slightly from traditional mechanical taps.

=== Installation Procedure ===
{| class="wikitable" style="width:100%;"
! Phase !! Action !! Technical Notes
|-
| '''Preparation''' || Clear the installation area and verify mounting hole dimensions. || Ensure the power source/battery pack location remains dry.
|-
| '''Mounting''' || Secure the tap body to the basin or countertop using the provided fixing kit. || Ensure the base seal (O-ring) is correctly positioned to prevent water ingress.
|-
| '''Electrical Setup''' || Connect the sensor cable to the control box/battery module. || Do not pull cables tightly; ensure connectors are fully seated and secure.
|-
| '''Hydraulic Connection''' || Connect the water supply hose to the solenoid valve and the outlet hose to the tap body. || Check that all rubber washers are present to ensure a watertight seal.
|-
| '''System Power-up''' || Install batteries or connect the mains transformer. || The system will typically enter a 30–60 second self-calibration mode.
|-
| '''Calibration & Testing''' || Verify sensor activation and adjust flow rate if necessary. || Keep hands away from the sensor area during the initial self-calibration.
|}

=== Installation Best Practices ===
* '''Reflective Interference:''' Ensure there are no highly reflective surfaces (such as polished chrome walls or mirrors) directly facing the sensor, as these can cause unintended activation.
* '''Moisture Protection:''' While control boxes are designed for bathroom environments, they should be mounted in a position that minimizes the risk of direct water splashing or pooling.
* '''Maintenance:''' If flow rate diminishes over time, the issue is typically a blocked inlet filter screen. It is recommended to inspect and clean the filter before attempting to adjust the solenoid valve.

=== Related Products ===
For a full range of touchless sanitary solutions, please visit our product catalog:

[https://www.uktaps.co.uk/automatic-sensor-taps-c-2.html Automatic Sensor Taps - UKTaps Collection]

----
''This guide is for informational purposes. If you are uncertain about electrical connections, it is recommended to consult a qualified plumber or electrician.''